Presets

Presets group together all those parameters that influence the generation of the g-code and, in the end, the quality of your print.

 

Advanced presets management was one of the main introduction in the new Voxelizer. We did that in order to make the process of g-code generation as simple and quick as possible, allowing you to get high quality prints fast. In this article we will see how to take full advantage of them.



Once you have voxelized your model, you will find the Printing settings tab with the presets on the left side of the screen.

 

 

There are three kind of presets: Filament, Durability and Support.

 

  • Filament presets group all those parameters that are influenced by the kind of filament that you are using, like extrusion speed, temperature, retraction and so on;
  • Durability presets regard how solid your print will be. Here you can modify the type and the density of the infill, as well as the thickness of the exterior shell;
  • Support presets give you control over the support of  your  model, when this is needed;

 

For each presets you can modify one major parameter with a slider directly from the Printing settings tab: path width and layer height ratio for the Filament presets (plus adaptive height option), infill amount for the Durability presets and angle to which to apply the support for the Support presets. 

 

You can add, modify and manage presets in the relative tabs, below the Printing Settings.

 

 

From here you can create a new preset by clicking on the plus icon. Or, after selecting an existing preset, click on the copy icon and start working from there. Once you has saved a preset you will find it the next time that you will open the software, until you delete it. Default presets cannot be modified.

 

 

Experiment with the different parameters, create your own presets and get the best out of your printer!

 presets.gif

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request

Comments

Please sign in to leave a comment.