How to Connect Your 3D Printer via LAN

Please follow the instructions below. 

1. Connect the ZMorph machine to your network's router with the Ethernet cable.
   
   
   
   
2. If your network has DHCP active (most networks do), ZMorph will get it’s IP address and show it on the front display panel.
   
   
   
   
3. In Voxelizer software, select Telnet as your connection method.
4. Type in the IP address displayed on LCD panel and click Connect.  
    

How to change network settings in the config file? 

To make sure that network connection will work fine user need to change few lines inside the printer config file. All necessary changes are described in following picture: