CNC PRO Milling file preparation

2D Milling

• Open Voxelizer 2.0 software and choose ZMorph VX machine, CNC PRO Toolhead and 2D Milling operation. Click 'START',

• Set material dimensions to match Raw material that would be used for milling,

• Change material position to LEFT along the X axis and FRONT along Y axis,

• Import your DXF file,

• Now the drawing can be freely moved, scaled and rotated on the table preview,

• Click NEXT when ready. You will be automatically moved to SETTINGS tab,

• Choose material from the drop-down list and Set Safe height for travel - remember to take into account any fixtures that might stick out over the material surface,

• Choose the operation that you would like to mill your drawing with. Choose an operation tool.
  Parameters are set by default - adjust them according to your needs,

• Apply operation settings to chosen parts of the drawing. When all operations are ready, click NEXT and wait for your G-code to be generated,

• Now you can check generated G-code and save it.

3D Milling

• Open Voxelizer 2.0 software and choose ZMorph VX machine, CNC PRO Toolhead and 2D Milling operation. Click 'START',

• Set material dimensions to match Raw material that would be used for milling,

• Change material position to LEFT along the X axis and FRONT along Y axis,

• Import your DXF file,

• Now the drawing can be freely moved, scaled and rotated on the table preview. Click NEXT when ready. You will me automatically moved to SETTINGS tab,

• Choose material from the drop-down list and Set Safe height for travel - remember to take into account any fixtures that might stick out over the material surface,

• Choose the operation that you would like to mill your drawing with. Choose an operation tool. Parameters are set by default - adjust them according to your needs,

• Apply operation settings to chosen parts of the drawing. When all operations are ready, click NEXT and wait for your G-code to be generated,

• Now you can check generated G-code and save it.