Laser PRO engraving file preparation

  • Open Voxelizer 2.0 software, choose the ZMorph VX machine and Laser PRO Toolhead. Click START.

1.JPG

  • Set material dimensions to match Raw material that would be used for milling.

2.png

  • Change material position to LEFT along the X axis and FRONT along Y axis.

3.png

  • Import your DXF file.

laser.png

  • Now the drawing can be freely moved, scaled and rotated on the table preview. Click NEXT when ready. You will be automatically moved to the SETTINGS tab.

5.PNG

 

  • Choose material from the drop-down list and Set Safe height for travel - remember to take into account any fixtures that might stick out over the material surface.

mceclip0.png

  • Choose operation that you would like to engrave your drawing with Parameters are set by default - adjust them according to your needs.

mceclip1.png 

  • Apply operation settings to chosen parts of the drawing. When all operations are ready, click NEXT and wait for your gcode to be generated.

6.png

  • Now you can check generated G-code and save it.

7.JPG

 

Have more questions? Submit a request

Comments

Please sign in to leave a comment.