Before following the steps from this article make sure to check how to begin the toolhead changing process.
- Connect the 'LEFT' cable to the 'LEFT' frame socket.
- Connect the extruder 'A' cable to X carriage 'A' plug.
- Enter the 'Maintenance’ menu,
- Go to the ‘Change tool’ section
- Choose ‘3D printing’
- Choose ‘Thickpaste printing’
Note: After choosing the toolhead the menu screen should go back to the main menu without any confirmation.
Note: Each workflow (3D printing; CNC; Laser; Thickpaste) will have a slightly different screen layout.